Best supplier made in China – replacement parts – in Kinshasa Democratic Republic of the Congo Quality Twin Screw Extruder for Powder Coating with top quality

Best  supplier  made in China - replacement parts -  in Kinshasa Democratic Republic of the Congo  Quality Twin Screw Extruder for Powder Coating with top quality

We – EPG Team the most significant gearbox & motors , torque limiter couplings and gears manufacturing unit in China with 5 different branches. For much more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Best Quality Twin Screw Extruder for Powder Coating

1. Mixers:

1.1 Computerized Container Mixer

Automatic container mixer is wor ept with continuous content trolleys, the container fills the supplies and lifted up and connnected tightly with mixing head routinely. The mixing head tilts collectively with the containers, and then get the homogeneous mixing end result, after finishing mixing as for each location time, and return to original place, the entire method will be managed by PLC

Primary Characteristics:

Several removable containers for round procedure
Higher performance
Adopting PLC to understand automation
Homogenized mixture
No curing granule
Handy for cleansing and routine maintenance
Protected and relaiable operation

Complex Data:
 2.Structure For the duration of normal functions, the middle member is place between the friction facings while becoming pressured by the disk spring. Underneath the set torque, the friction power transmits rotation. Throughout overload, if the operational torque exceeds the set torque, the center member slips between the friction facings.

Design Quantity (L) Output (kg/tank) Mixing Motor (kw) Tilting Motor (kw) Crushing Motor (kw) Mixing Time (min) Handle Manner All round Dimensions (MM)
FHJ-fifteen 15 eight 1.five     5-ten PLC  750*480*950
FHJ-120 120 sixty 5.5 .2   five-10 PLC  1800*1800*1950
FHJ-150  one hundred fifty 70 5.five .37 2.2 5-10 PLC  2150*1100*2300 
FHJ-300 300 150 fifteen three 2.two 5-ten PLC  2150*1100*2300 
FHJ-600  600 three hundred 22 4 four five-10 PLC  2650*1250*2700 
FHJ-one thousand 1000 500 thirty 4 four 5-10 PLC  2900*1550*3100 
FHJ-2000  2000 a thousand forty five five.five 5.5 five-10 PLC  3500*2350*3650 

one.2 High Pace Pre-Mixer:


High performance & simple operation

Straightforward coloration changing, safe cleaning

Mixed mixing & crushing as 1

Mixing time preseting, short & homogeneous

Exceptional sealing, powder lea ept free

Vertical or horizontal kind as optional

Complex Info:

Design Volume (L) Mixing Motor (kw) Crushing Motor (kw) Mixing Time (min) Total Dimensions (mm)
GHJ-twenty twenty .55 .37 three-5 seven hundred*500*800
GHJ-100 a hundred three one.five three-five a thousand*600*900
GHJ-200 200 5.5 three three-five 1500*900*1400
GHJ-three hundred three hundred 7.5 4 three-six 1800*900*1400
GHJ-500 500 fifteen 5.5 four-six 1800*1300*1800
GHJ-800 800 eighteen.five 7.five four-6 1900*1300*2000
GHJ-a thousand a thousand 22 7.5 4-6 2300*1400*2000

1.3 Double Cone Mixer:

This twin-cone mixer is composed of a rotating container with two cones and two stirrers. This equipment is applicable for powder coating, pharmaceutical, chemical, foodstuff, dyestuff, and other multi-compound supplies. It has impressive influence in mixing powders and particles with comparatively excellent fluidity. Its barrel is manufactured of stainless metal, which is polished equally inside of and exterior, featuring lovely appearance and straightforward operation.

Specialized Knowledge:

Model Volume (L) Output (kg/tank) Rotating Motor (kw) Mixing Motor (kw) Mixing Time (min) Total Dimensions (mm)
SXH-100 three hundred a hundred and fifty one.five 1.5 -thirty 1760*830*2030
SXH-two hundred four hundred two hundred one.5 one.5 -30 1830*830*2150
SXH-300 600 300 two.two one.five -30 1980*a thousand*2275
SXH-500 1000 500 4 4 one-30 2630*1140*2620
SXH-one thousand 2000 a thousand five.5 5.five -30 3060*1440*2860
SXH-1500 3000 1500 seven.5 seven.5 -thirty 3700*2000*2970
SXH-2000 4000 2000 eight.five eight.five -thirty 3800*2500*3500

2. Twin-Screw Extruder

2.1 Higher torque & Higher Pace Rotation Twin-Screw Extruder:

Principal Functions:

*Complete Gearbox from professional EPT maker, lower sounds, sturdy longevity

*High screw velocity, large shearing, quick discharge

*Impartial lube oil cooling technique design and style

*Torque limiter to protect the drive practice

*Suited for reclaim powder, specific powder generation

*Break up style of barrel and liner inserts for easy cleaning and maintainence

*Best & Side feeding choices

*Other functions very same as standard type extruder

Technological Parameters:

Design Capability (kg/h) Screw Diameter (mm) Screw Length (mm) Screw Pace (r/min) Main Motor (kw) Feeder Motor (kw) Heating Power (kw) Overall Proportions (mm)
TSX-40 80-260 40 16D -800 eleven/15/eighteen.5 .fifty five 8 1850*seven hundred*1750
TSX-52 a hundred and fifty-450 52 16D -800 22/30/37 .seventy five ten 2700*900*2200
TSX-sixty five four hundred-one thousand sixty five 16D -800 45/fifty five/seventy five one.1 12 2900*one thousand*2400
TSX-seventy five 800-1200 seventy five 16D -800 75/90 one.5 sixteen 3100*1200*2500
TSX-eighty five 1200-1800 85 16D -800 90/110 2.two twenty 3700*1500*2900

two.2 Typical Variety Co-Rotation Parallel Twin Screw Extruder


*Robust shearing, straightforward cleansing

*Correct car temperature management, high cooling & heating exchagne

*Hinged clamshell type barrel opening, segmented liners for effortless replacing and cost saving

*Feeder straightforward assembly & disassembly, inner composition to steer clear of agglomeration

*Configurable screw used for defferent powder formulas

*Screw and barrel undertake special materials like Cr12MoV, CPM, and so forth., large sporting resisting

*Quite gearbox with low noise dB level

*Torque limiter to protect the generate train

*Reduced power usage

Technical Parameters:

Design Capability (kg/h) Screw Diameter (mm) Screw Size Screw Pace (r/min) Primary Motor (kw) Feeder Motor (kw) Heating Power (kw) Overall Dimensions (mm)
SLJ-40 eighty-220 forty 16D -500 11/fifteen/eighteen.5 .55 four 1800*600*1700
SLJ-fifty a hundred and fifty-three hundred fifty 16D -500 22/thirty .75 8 2600*seven hundred*2000
SLJ-55 three hundred-400 fifty five 16D -500 thirty/37 .75 eight 2700*900*2300
SLJ-60 400-600 sixty 16D -500 45 12 2750*1000*2350
SLJ-75 600-800 seventy five 16D -five hundred 55 1.5 twelve 2900*1100*2400
SLJ-80 800-1200 80 16D -five hundred seventy five/90 2.2 twenty 3700*800*2800

2.3 Lab Type Extruder

Technical Parameters:

Design Ability (kg/h) Screw Diameter (mm) Screw Length Screw Velocity (r/min) Main Motor (kw) Feeder Motor (kw) Heating Electrical power (kw) Total Proportions (mm)
TSX-20 .2-ten 22 16D -600 two.2-four .one two 1600*three hundred*850
SLJ-thirty 1-30 thirty 16D -500 3-5.five .eighteen 3.two 1430*550*1300
SLJ-32 40-80 32 16D -500 7.5/11 .twenty five 3.two 1600*five hundred*1500

3 Cooling Belt

3.1 H2o Cooled Cooling Belt with Flaker:


Regular good quality imported metal belt

Bottom cooling water spraying program, installed heating and cooling gadget

Geared up with guidebook system to steer clear of deforming

Greater cooling consequence, higher productive efficiency

Couple of upkeep and straightforward cleaning

Chips thickness and roller velocity adjustable

Crusher with finger pin and teeth type

Minimized cross contamination, basic procedure

Technological Parameters:

Design Roller Dia. (mm) Belt Width (mm) Belt Duration (mm) Push Motor (kw) Capacity (kg/h) Cooling Method Overall Proportions (mm)
GDY-406 220 600 4000 one.five two hundred-four hundred Cooled Drinking water 4000*750*1600
GDY-508 325 800 5000 three four hundred-five hundred Cooled Water 5000*900*1800
GDY-510 325 1000 5000 three 500-seven hundred Cooled Drinking water 5000*1100*1900
GDY-610 440 a thousand 6000 4 600-800 Cooled Water 6000*1100*1900
GDY-612 440 1200 6000 4 700-900 Cooled Drinking water 6000*1400*1900
GDY-712 600 one thousand 7000 5.5 900-1200 Cooled H2o 7000*1400*2000

three.2 Air Cooled Variety Caterpillar Cooling Belt with Flaker:


Stainless steel created caterpillar, air cooling

Flake chips thichness and conveying velocity adjustable

Realistic style for cooling rollers within, expert surface area remedy to avoid water lea ept and rust

Installed with simplified air conditioning gadget

Risk-free operation, like crisis button, clockwise and counter-clockwise rotation.

Technological Parameters:

Model Roller Dia. (mm) Belt Width (mm) Belt Size (mm)  Travel Motor (kw) Blower Motor (kw) Ability (kg/h) Cooling Manner Total Dimensions (mm)
JFY-204  a hundred and sixty/160 400 2000 .55 two hundred-four hundred thirty-a hundred Chilled H2o&Air 2000*450*900
JFY-406 160/220 600 4000 .75 four hundred-five hundred 100-220 Chilled Drinking water&Air 4000*850*950
JFY-508 a hundred and eighty/325 seven-hundred 5000 .75 500-seven hundred 220-400 Chilled Drinking water&Air 5000*1050*1200
JFY-510 180/325 800 5000 600-800 400-500 Chilled H2o&Air 5000*1150*1200
JFY-610 a hundred and eighty/325 800 6000 1.1 700-900 500-700 Chilled H2o&Air 6000*1150*1200
JFY-710 a hundred and eighty/325 a thousand 6000 one.five 900-1200 600-900 Chilled Drinking water&Air 7000*1250*1450
JFY-812 one hundred eighty/325 one thousand 7000 2.2 900-1200 900-1200 Chilled Water&Air 8000*1650*1600

three.3 PU Variety Air Cooled Cooling Belt


Adjustable thichness and roller pace

Air cooled to steer clear of cross contamination

Roller and crusher outfitted with overload protection

Large efficiencies

One piece PU belt to faciliate easy cleaning and routine maintenance

Compact design and style for restricted room

Technological Parameters:

Product Roll Dia. (mm) Band Width (mm) Band Size (mm) Motor Power (kw) Throughput (kg/h) Proportions (mm)
PFY-104 156 four hundred 1000 50 one thousand*870*1050
PFY-206 220 600 2000 one hundred fifty 2000*1150*1100
PFY-208 445 800 2000 two.2 three hundred 2000*1100*1100
PFY-210 445 one thousand 2000 2.two 500 2000*1300*1100
PFY-310 622 1000 3000 2.two 800 2000*1300*1200

four ACM (Air Classifier Mill) Grinding Technique


Protection in accordance with EU explosion resistant standard ATEX/PSR11

Lower sounds layout (from mill to enthusiast program)

Particle measurement distribution adjustable on request

Mill physique temperature and air consumption volume monitoring

Rotary sieve with distinctive design and style and sturdy for mesh put on problem

Complete grinding program made for powder dust free

Completed powder merchandise with more than ninety eight p.c

Higher output, effortless operation cleaning and routine maintenance

Technological Parameters:

Product Mill Motor kw Rotor rpm Classifier Motor Classifier rpm Enthusiast kw Air cbm/h Ability kg/h Total proportions mm
ACM-02 two.two 12000 .37 -3000 three 350 2-thirty 1430*550*1300
ACM-05 4 11000 .seventy five -3000 four 800 30-eighty 2100*a thousand*2150
ACM-10 7.five 7000 1.five -3000 eleven 2500 a hundred-260 6200*1250*3200
ACM-fifteen eleven 7000 one.5 -3000 15 3000 200-350 6500*1300*3300
ACM-twenty fifteen 6600 2.2 -3000 22 3500 three hundred-four hundred 7500*1300*3600
ACM-30 22 5500 three -3000 30 4500 four hundred-550 7900*1500*3600
ACM-40 thirty 4600 5.five -3000 37 5500 600-800 8000*1700*3600
ACM-fifty 37 4000 7.5 -3000 forty five 6500 a thousand-1200 9000*1900*3900
ACM-sixty forty five 3500 seven.5 -3000 55 8000 1200-1600 9000*2000*4000


Xihu (West Lake) is a major manufacturer in China of Powder Coating Production Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit 30 years of activities in this ept and have exported to almost 30 countries and regions in the previous ten years, and get widely excellent reputations.

We handed CE certification acceptance and ATEX explosion resistant take a look at, and so forth. international standards, we do know how to meet the diversified and tailored created requests of our customers.

Our eternal company philosophy: consistant top quality, successful conversation, accountable support.

one.Any inquires will be replied in the initial time.

2.Large top quality merchandise, aggressive cost, quick guide time.

3.Our revenue workers will be have a good communication with you ,enable you fully comprehend the circumstance of our enterprises and items.

4.We will provide substantial quality overseas support ,our complex employees will be able to offer you with technical support ,for you individually to overseas assembly and check gear.

five.Our consumer services workers will place your feedback to the technological staff in the very first time, timely solve your dilemma.

The use of original equipment manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our business and the detailed substitution components contained herein are not sponsored, accepted, or manufactured by the OEM.

Best  supplier  made in China - replacement parts -  in Kinshasa Democratic Republic of the Congo  Quality Twin Screw Extruder for Powder Coating with top quality

Best  supplier  made in China - replacement parts -  in Kinshasa Democratic Republic of the Congo  Quality Twin Screw Extruder for Powder Coating with top quality

Best  supplier  made in China - replacement parts -  in Kinshasa Democratic Republic of the Congo  Quality Twin Screw Extruder for Powder Coating with top quality

Recent Posts