Product Description
Product Description
WTZ A700 Overload limiter can be in the form of Chinese characters, graphics, characters and so on comprehensive display the various parameters in the process of work.
As the main hook load, vice hook load, work boom Angle, length of boom, radius, etc.;
○Overload Limiter Alarm function
Have sound and light alarm function: when the crane boom work amplitude limit close to work, when lifting load and torque device close to the permitted load limit, torque system issued a warning of slow beeping sound. Warning lights flashing slowly torque system.
When jib frame work scope to work limit, when the lifting load and torque reaches equipment when the permitted load limit moment send urgent alarm beeping sound. Shortness of torque system alarm indicating red light flashing.
○ Overload Limiter Protection function
Control output function: when boom amplitude limit close to work, work when lifting load and torque device close to the permitted load limit, the system output torque control signal to stop the crane continue to continue to run in the direction of risk, allow crane moves in the direction of security.
Load Moment Indicator(safe load indicator or Crane computer) is a device which is installed on various sorts of cranes like mobile, crawler, tower, gantry, portal, marine and offshore crane. It alert the operator if the lift is exceeding the safe operating range. In some cases, the device will physically lock out the machinery in circumstances it determines to be unsafe.
It controls the lifting equipment to function as per the manufacturer’s suggested safe load charts. Each of the measured parameters like load weight, working radius, control limit,angle and extension of the crane boom, etc will then further be displayed in the operator’s cabin.
WTZ A700 overload limiter system for terminal quayside crane
WTZ-A700 Safe Load Indicator system( LMI )
Technical Parameters
| Model: WTL-A700 | Control Output: <= 5 Channels |
| Display:8 inch LCD | System Composition Error: ±5%(F.S.) |
| Working Temperature: -20ºC~60ºC | Power Comsumption:<35W |
| Operating Humidity: 95%RH(25ºC) | Alarm Volume: >60db |
| Weight Measurement Range: 0T~999.9T | IP Grade: IP 64 |
| Resolving Ability: 0.1T | Power Supply: AC220V±10% |
| Singal Input: <= 6 Channels | Application:terminal container crane&portal crane |
Installation Cases
Certifications
Company Profile
Weite Technologies Co.,Ltd
Founded in 2002, it is national hi-tech enterprise located in HangZhou, China. It has been focusing on R&D and OEM manufacturing of lifting safety protection devices such as Load Moment Indicator, Safe monitoring systems, overload limiter, Load cell, Anemometers etc.
We continuously concentrate on ensuring lifting equipments run safely as long-term pursuing goal.
“The trusted Safety Partner for Global Top 100 Crane Owning Companies like Tat Hong, Asiagroup, Big Crane and Fortune 500 corps” . Nowadays, CZPT products are widely used in marine industry,electrical, chemical, steel, metallurgy, construction, ports and other industries, and have been wide spreaded to over 70 countries and regions.
Global Partners
FAQ
1) Is your company well-reputated? How to prove that?
It is a China Top 3 brand focusing on Crane Safety Protection Equipment. We are also Safety Partners for Global Top 100 Crane Owning Companies like Tat Hong(top 9), Asiagroup(top 45), Big Crane(top 94) and Top 500 companies such as ABB, Macgragor,TTS,CNOOC,etc. Products are been sold to over 70 countries and regions globally.
2) How to assure the quality?
The Product Warranty for the total item is 12 months. Any problem after installation, we will change the new 1 for free.
3) How to install the LMI?
English User Manual(include all the details of each item) will be offered for installation and trouble shooting(refer to the pic below). Also free Remote Instant Technical assistance would be offered by our english engineers. Or we can send our engineers to assist you locally.
4) How much is your LMI system?
Send me the crane model, hook number, working conditions(Luffing Tower Working Condition, Pilling) and special requirement and the like. Your contact info is a must.
5) How can I place order?
A: You can contact us by email about your order details, or place order on line.
6) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and Paypal, Western Union are the most usual ways we are using.
Related Products
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Task: | Adjust |
|---|---|
| Structure: | Combination |
| Mathematical Model: | Linear |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Choosing the Right Limiter Torque Control System
Whether you’re building a new machine or retrofitting an existing one, you’ll need a limiter torque control system. There are a number of different types available, and they can help you ensure the right torque is applied to your machine’s parts.
Pneumatic approach to limiter torque
Choosing the right torque limiter is essential to protect your machine and drive system from over-torque. There are several types of torque limiters, including mechanical, pneumatic, electromagnetic, and magnetic.
Mechanical torque limiters are a common type of torque limiter. They engage the driven side of the drive shaft by using a series of rollers or balls. They can be used in a wide variety of applications.
A pneumatic approach to limiter torque is used in applications that require maximum power during start-up. A torque limiter consists of an input shaft and an output shaft, which are connected by a pin. Once the torque limiter exceeds the torque limit, the pin fractures and the output shaft is disengaged. The pin can then be replaced to reconnect the shaft.
Torque limiters can also be used to control air volume. In pneumatic systems, air pressure is applied to a piston to force a ball detent device to engage. A microswitch in the case activates the limit switch when excessive loads are applied.
Electromagnetic torque limiters are similar to the pneumatic approach. The output shaft is a rotor. The inner shaft is a shaft with a small back iron that carries a PM field. The PM field generates torque, which is controlled by the angle between the magnets.
Electromagnetic torque limiters can be designed to operate at any temperature. They can also have a variable airgap to change the magnetic field. The MR fluid can also be used in magnetic field-based torque limiters to increase the density of torque.
Mechanical torque limiters are also used to limit transmission torque in robotic applications. They are available in a variety of sizes. They can also be integrated with an electric machine for mass savings.
Torque limiters can also be used as fail-safe devices. They act like fuses during overload. When the torque limiter is disengaged, the torque is transmitted to the drive system. This prevents damage to the drive system components.
Depending on your application, you can choose a torque limiter that can be adjusted to a low value. This allows you to easily control the torque limit for the start-up torque and can be adjusted to accommodate the machine’s cycle requirements.
Permanent-magnet synchronous torque limiter
Whether you are looking to replace a damaged motor, or simply want to enhance performance in an application with high speed passing requirements, the application of a permanent-magnet synchronous torque limiter can be a great option. This type of torque limiter can help improve high speed passing performance, as well as provide a safety measure that prevents the engine from overheating.
Torque limiters come in a variety of formats. They can be static or dynamic, and can be reset manually or automatically. They can also be in the form of a hub, a sheave, or a pulley. Some can even mount a sprocket. The synchronous magnetic type uses two discs, with mating magnets on the face of each disc. The torque limiter can be adjusted by changing the gap between the magnets.
The synchronous magnetic type can also be used to transmit torque through a thin plastic wall. This type of limiter can also be set to a maximum value. It is also useful in applications with continuous running. It can be used in low power applications, such as robotic actuators.
A magnetic particle clutch is also a good example of a torque limiter. This type uses a current to create a magnetic field, a la the magnetic hysteresis. This magnetic field is then converted into d-q coordinates, which are viewed in the rotor reference frame. The magnetic particle clutch’s most notable feature is that the torque can be statically set or dynamically adjusted.
The most important function of a torque limiter is to prevent the engine from overheating or explosion. This can be achieved by setting the correct torque limit, or by having a system that will automatically reset the limit if the torque limit is exceeded. Some torque limiters even have a compression adjustment that can be used to set the appropriate limit.
Other types of torque limiters include a spring-loaded pawl-spring type, a ball detent type, and a synchronous magnetic type. A spring-loaded pawl-spring type can also be manually or automatically reset. A ball detent type may have several detent positions. A synchronous magnetic type may have more backlash than a mechanical type.
Mach III friction torque limiter
Basically a torque limiter is a device that protects the transmission from damage when the torque is pushed beyond a certain limit. This is achieved by preventing the torque from transmitting into the gearbox. The limiter is a small device that can be mounted on any shaft. If you are looking for a simple yet effective way to protect your investment, then you should consider a torque limiter.
A friction torque limiter is a small device that transfers torque linearly in relation to the force applied to a set of discs. This is the simplest form of torque transfer and it is not difficult to install.
A torque limiter is typically a small device that is mounted on the end of a shaft or in the output shaft of a gearbox. This device can be configured in a number of different ways. The most common configurations involve mounting the device on the end of the shaft. It can be positioned to rotate in both the clockwise and counterclockwise directions.
A friction torque limiter is a small device that protects the transmission from damage when the torque is pushed beyond a certain limit. The limiter is a small device and it can be positioned to rotate in both the counterclockwise and clockwise directions. The limiter has a number of different mounting configurations, ranging from through-shaft to NEMA C-face. Regardless of the mounting method, the limiter is a small device that is easy to install.
The torque limiter is the best and cheapest way to protect the transmission from damage. In the event of an overload, the device will disengage and disconnect the barrel from the gearbox. You can also get an overload detection system that monitors the output shaft rotation and signals the control system to shut down the motor.
A torque limiter is a small device that can protect the transmission from damage when the torque is pumped beyond a certain limit. This is achieved through a combination of a drive hub and a set of discs. The discs are able to rotate in both the counterclockwise and the clockwise directions.
CZPT FT series torque limiter
FT CZPT is a torque limiter made of stainless steel. The FT is a full-trough concave curve, full-pour casting emitter, with a standard 6 inch width and 250 watts of output. The limitator is protected by corrosion and a white glaze. It is also tamper-resistant, and pre-shimmed and pre-tested. It is available in a variety of colors.
The FT CZPT torque limiter has a center member machined flat, with a sintered iron bushing that protects the hub of the limiter from slippage. The bolts are pre-shimmed at the factory, and they are pretested to ensure that the force is consistent. The spring cup bolts come in a variety of colors. A torque setting is pre-set in the factory, and the limiter is delivered ready to use. The FT CZPT torque limiter includes a chain coupling, and is available in a variety of torque limiters. If you have questions about this torque limiter, or are interested in ordering a limitator, you can contact the FT CZPT sales team.
editor by CX 2024-03-27