Product Description
Product Description
WTZ A100N Overload limiter can be in the form of Chinese characters, graphics, characters and so on comprehensive display the various parameters in the process of work.
As the main hook load, vice hook load, work boom Angle, length of boom, radius, etc.;
○Overload Limiter Alarm function
Have sound and light alarm function: when the crane boom work amplitude limit close to work, when lifting load and torque device close to the permitted load limit, torque system issued a warning of slow beeping sound. Warning lights flashing slowly torque system.
When jib frame work scope to work limit, when the lifting load and torque reaches equipment when the permitted load limit moment send urgent alarm beeping sound. Shortness of torque system alarm indicating red light flashing.
○ Overload Limiter protection function
Control output function: when boom amplitude limit close to work, work when lifting load and torque device close to the permitted load limit, the system output torque control signal to stop the crane continue to continue to run in the direction of risk, allow crane moves in the direction of security.
Load Moment Indicator(safe load indicator or Crane computer) is a device which is installed on various sorts of cranes like mobile, crawler, tower, gantry, portal, marine and offshore crane. It alert the operator if the lift is exceeding the safe operating range. In some cases, the device will physically lock out the machinery in circumstances it determines to be unsafe.
It controls the lifting equipment to function as per the manufacturer’s suggested safe load charts. Each of the measured parameters like load weight, working radius, control limit,angle and extension of the crane boom, etc will then further be displayed in the operator’s cabin.
WTZ-A100N Overload Limiter ( LMI ) System
Technical Parameters
DATA LOGGER
Data USB downloadable: built-in USB interface, can support operating data download, can review the historical data from any time period. Through the analysis of the record, the complete status of site operation can be restored. Ultra-large Capacity: the device can support actual load data 50,000 circular logging, higher capacity than the standard 16000 record.
Data Record Image
Installation Cases
Certifications
Company Information
Weite Technologies Co.,Ltd
Founded in 2002, it is national hi-tech enterprise located in HangZhou, China. It has been focusing on R&D and OEM manufacturing of lifting safety protection devices such as Load Moment Indicator, Safe monitoring systems, overload limiter, Load cell, Anemometers etc.We continuously concentrate on ensuring lifting equipments run safely as long-term pursuing goal.
“The trusted Safety Partner for Global Top 100 Crane Owning Companies like Tat Hong, Asiagroup, Big Crane and Fortune 500 corps” . Nowadays, WTAU products are widely used in marine industry,electrical, chemical, steel, metallurgy, construction, ports and other industries, and have been wide spreaded to over 30 countries and regions.
Global Partners
FAQ
1) Is your company well-reputated? How to prove that?
It is a China Top 3 brand focusing on Crane Safety Protection Equipment. We are also Safety Partners for Global Top 100 Crane Owning Companies like Tat Hong(top 9), Asiagroup(top 45), Big Crane(top 94) and Top 500 companies such as ABB, Macgragor,TTS,CNOOC,etc. Products are been sold to over 30 countries and regions globally.
2) How to assure the quality?
The Product Warranty for the total item is 12 months. Any problem after installation, we will change the new 1 for free.
3) How to install the LMI?
English User Manual(include all the details of each item) will be offered for installation and trouble shooting(refer to the pic below). Also free Remote Instant Technical assistance would be offered by our english engineers. Or we can send our engineers to assist you locally.
4) How much is your LMI system?
Send me the crane model, hook number, working conditions(Luffing Tower Working Condition, Pilling) and special requirement and the like. Your contact info is a must.
5) How can I place order?
A: You can contact us by email about your order details, or place order on line.
6) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and Paypal, Western Union are the most usual ways we are using.
Related Products
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Spare Parts |
|---|---|
| Warranty: | 1 Year |
| Type: | Gantry Crane & Portal Crane |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Different Types of Limiter Torque Offsets
Whether you are looking for an over or offset torque limiter, or you are simply looking for the correct torque measurement device to suit your needs, there are a number of different options available to you.
Over-torque limiters
Choosing the right torque limiters can help to protect your machine from damage. These devices are used in sheet metal and textile machinery, printing and converting machines, industrial robots, and conveyors.
Torque limiters are devices that protect equipment from damage caused by overloads. These devices are usually mechanical, but can also be electronic. Electronic overload protection monitors a variety of parameters, including rotational frequency, current, voltage, and pressure. They can also be programmed to monitor temperature.
The most common mechanical torque limiters are shear-pins and slip-clutches. These devices are usually installed in gears, shafts, motors, pumps, or servos. These devices disengage the drive line before an electronic device, preventing damage from accumulated rotational energy.
Torque limiters have also been used for years in marine applications. These devices are installed as close to the point of impact as possible.
Torque limiters have also been installed in servos and stepper motors. They are intended to eliminate mechanical overloads that can cause unplanned downtime. They also prevent damage from misuse or accidents.
Torque limiters are also used in conveyors and other assembly lines. These devices protect against over-torque situations, which can damage drive motors and drive components. These devices are used in woodworking machines, printing and converting machines, and industrial robots. They also provide an effective means of coupling gears and sprockets.
Torque limiters come in a variety of styles and models. To determine which device is right for your application, contact a manufacturer or a specialist. Choosing the right one can help to protect your machine from damage at an affordable cost.
Torque limiters are not designed to operate in a continuous slip environment. They should be selected based on the type of machine you are operating and the torque load you expect to generate. They should also be installed near the point of impact to avoid accidents.
The mechanical torque limiter is the most common type of slip clutch. It uses special springs with negative spring rates to avoid false trips. This design has been improved over the years from the simple slip-clutch.
The electronic overload protection is also an option, especially if you are using more advanced drive systems. It can monitor a variety of parameters, including rotational speed, rotational frequency, current, voltage, and position.
Offset torque limiters
Using Limiter Torque Offsets can protect your machinery from overloads. These devices are designed to protect rotating parts. They can be used in a variety of ways. You can mount a pulley or a sprocket in a torque limiter. They can be installed in any machine shop.
Torque Limiters, also called slip clutches, are used to protect rotating components from overloads. They can also be used to protect machines from crashes. These devices use friction disks to transmit force from a driving shaft to a driven member. They can also be used with electronic sensors to protect rotating parts.
A torque limiter, or slip clutch, is a mechanical overload protection device that transmits torque from the driven shaft to the driven member through friction disks. Some torque limiters use friction plates. Others use backstop clutches that transmit torque in reverse. These devices can be used in many applications, including the construction industry, automotive industry, and manufacturing.
Torque Limiters work by disconnecting the drive shaft from the driven member during overloads. This ensures that the rotating components can operate without damage. Torque Limiters are available in a variety of styles and designs. Some limiters are spring-loaded. Some have compression adjustment, which allows them to be reset automatically.
Friction-disc torque limiters are a great option for applications that require constant running. They can be used in applications where a torque limiter may be part of a gearset assembly. They provide moderate adherence to a safe-torque setting. However, they may be susceptible to damage.
The torque limiter is typically the last gearset in the transmission. The drive sprocket must be sized based on the amount of torque that is needed to disengage the drive. A torque limiter can be mounted directly or via an adapter plate. It is important to center the drive sprocket over the bearing. This is done by machining the drive attachment.
Ball detent torque limiters can be used in single-position or multiple-position configurations. They can also be used in hub or hub/sprocket combinations. They can be manually reset, or can be set dynamically.
Using Limiter Torque Offsets is a quick and easy way to protect your equipment. Torque Limiters can be used with a wide range of applications, and you can easily adjust the size to suit your needs.
Ball detent torque limiters
Using a torque limiter protects equipment, such as sensitive machinery, from overloads. A torque limiter may be a mechanical device or an electronic device. Both types protect rotating machine components.
A mechanical torque limiter engages with the driven side of a machine through a small groove. A ball or roller is then inserted into the groove. The balls or rollers are then hardened to at least Rc 60. These components are then held in detents on the shaft. The balls and rollers slide out of the detents when the torque limiter experiences overload. The balls and rollers are then re-engaged when the overload is removed.
Some torque limiters use a snap-acting spring to release torque. Others use a pneumatic control system, which uses air pressure to force the ball detent device to disengage. Some systems also offer a random reset device.
Torque limiters are used in a variety of applications, including food and textile processing, packaging, and packaging and transportation. They are also commonly used in sewage treatment plants. They offer a wide variety of options, such as chain couplings, overload detector mechanisms, and various combinations.
A ball detent torque limiter provides a high level of accuracy. Its ability to automatically engage and disengage makes it a good option for applications where accuracy is important. Its design also provides the operator with a reliable torque limiter without needing manual intervention.
Torque limiters have many applications, including limiting transmission torque, protecting sensitive equipment, and controlling the torque of an axis. Some models can also be used in combination with electronic overload protection. Some models feature adjustable overload settings, which automatically disengage the torque limiter when the overload occurs. The torque limiter’s size and configuration should be determined based on the torques experienced by the axis. A torque limiter should also be designed to fully disengage the driven and driving components.
The two main types of torque limiters are mechanical and pneumatic. A pneumatic torque limiter will require a pneumatic control system, which utilizes air pressure to disengage the torque limiter in case of overload. A mechanical torque limiter will engage with the driven side of a machine through balls or rollers that are inserted into sockets on the pressure flange.
Measuring torque limiter output flange
Whether you are designing a new machine or repairing one, you need to know how to measure torque limiter output flange to ensure that your equipment is functioning properly. The torque limiter can help you protect your drive motors and gearboxes from costly damage. These devices are used in industrial robots, conveyors, woodworking machines, and printing and converting machines.
Torque limiters are light in weight and low in cost. They are also easy to install and maintain. When your machine is overloaded, the torque limiter acts as a clutch to disengage the input and output shafts. This reduces the potential for malfunction, and provides a higher level of reliability.
Torque limiters are available in two different types. The friction type uses spring loaded friction disks that slip when the torque exceeds a certain threshold. The other type uses permanent magnets mounted to each shaft. The magnetic torque limiter is a fast acting and effective way to limit torque.
Torque limiters also work with electronic sensors. During an overload condition, the torque limiter will disengage the input and output shafts within fractions of a second. This eliminates the possibility of a mechanism malfunction.
Torque limiters come in many shapes and sizes. The size of the body depends on the torque load and disengagement torque. The basic model features a flange for parallel shafts. However, more advanced models use pneumatic technology and use balls or rollers in sockets. This allows for a higher level of torque setting sensitivity.
Measuring torque limiter output flange requires that you measure the outside diameter of the sprocket. The inside diameter should match the centering diameter of the output flange. For a larger diameter, a tolerance of about half-inch is recommended. You should also check to ensure that the sprocket face is square. This is important for clearance.
Torque limiters are used in industrial robots, assembly lines, and sheet metal processing equipment. They can also be used in textile machinery. They are high in reliability and low in cost. This is why they are used so widely.
Torque limiters are also useful in preventing a situation where only one rudder surface operates. A torque limiter can also be used to prevent torque transmission through axial displacement. This prevents the drive shaft from spinning and causing damage to the test piece.
editor by CX 2024-03-30