China Top Quality Torque Limiter Flexible Grid Coupling torque limiter extension

Product Description

JS6300 Series Grid Coupling

Grid Coupling is widely used in metallurgy, mining, lifting, transportation, petroleum, chemical, ships, textile, light industry, agricultural machinery, printing machines and pumps, fans, compressors, machine tools and other mechanical equipment and industry shaft transmission.

♦Feature
1.The serpentine spring as the elastic element, the elastic strong at the same time, greatly improves the grid coupling torque, widely used in heavy machinery and general    machinery.The serpentine spring special technology department, has long service life, allowing higher speed, has good ability to compensate in the axial, radial and angle

2.High transmission efficiency, start safety. Transmission efficiency of up to 99.47%, short-time overload capacity is 2 times the rated torque, operation safety.

3.Simple structure, convenient assembly and disassembly, long service life

4.Damping effect is good to avoid the resonance.

♦Basic Parameter And Main Dimension

Note:The nominal torque of the coupling is the same with JS100Series.But the nominal torque of the brake disc should be choosen from above table.

♦Product Show

♦Other Products List

♦Our Company
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.

Welcome to customize products from our factory and please provide your design drawings or contact us if you need other requirements.

♦Our Services
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.

♦FAQ
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.

Q 3:How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples ? Is it free or extra ?
Yes, we could offer the sample but not for free.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 month under normal circumstance.

Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling ?
A:100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.

Q 9: What’s your payment?
A:1) T/T. 2) L/C 

♦Contact Us
Web: huadingcoupling
Add: No.1 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

###

###

###

###

###

###

###

###

###

###

###

###

Choosing the Right Limiter Torque Control System

Whether you’re building a new machine or retrofitting an existing one, you’ll need a limiter torque control system. There are a number of different types available, and they can help you ensure the right torque is applied to your machine’s parts.

Pneumatic approach to limiter torque

Choosing the right torque limiter is essential to protect your machine and drive system from over-torque. There are several types of torque limiters, including mechanical, pneumatic, electromagnetic, and magnetic.
Mechanical torque limiters are a common type of torque limiter. They engage the driven side of the drive shaft by using a series of rollers or balls. They can be used in a wide variety of applications.
A pneumatic approach to limiter torque is used in applications that require maximum power during start-up. A torque limiter consists of an input shaft and an output shaft, which are connected by a pin. Once the torque limiter exceeds the torque limit, the pin fractures and the output shaft is disengaged. The pin can then be replaced to reconnect the shaft.
Torque limiters can also be used to control air volume. In pneumatic systems, air pressure is applied to a piston to force a ball detent device to engage. A microswitch in the case activates the limit switch when excessive loads are applied.
Electromagnetic torque limiters are similar to the pneumatic approach. The output shaft is a rotor. The inner shaft is a shaft with a small back iron that carries a PM field. The PM field generates torque, which is controlled by the angle between the magnets.
Electromagnetic torque limiters can be designed to operate at any temperature. They can also have a variable airgap to change the magnetic field. The MR fluid can also be used in magnetic field-based torque limiters to increase the density of torque.
Mechanical torque limiters are also used to limit transmission torque in robotic applications. They are available in a variety of sizes. They can also be integrated with an electric machine for mass savings.
Torque limiters can also be used as fail-safe devices. They act like fuses during overload. When the torque limiter is disengaged, the torque is transmitted to the drive system. This prevents damage to the drive system components.
Depending on your application, you can choose a torque limiter that can be adjusted to a low value. This allows you to easily control the torque limit for the start-up torque and can be adjusted to accommodate the machine’s cycle requirements.

Permanent-magnet synchronous torque limiter

Whether you are looking to replace a damaged motor, or simply want to enhance performance in an application with high speed passing requirements, the application of a permanent-magnet synchronous torque limiter can be a great option. This type of torque limiter can help improve high speed passing performance, as well as provide a safety measure that prevents the engine from overheating.
Torque limiters come in a variety of formats. They can be static or dynamic, and can be reset manually or automatically. They can also be in the form of a hub, a sheave, or a pulley. Some can even mount a sprocket. The synchronous magnetic type uses two discs, with mating magnets on the face of each disc. The torque limiter can be adjusted by changing the gap between the magnets.
The synchronous magnetic type can also be used to transmit torque through a thin plastic wall. This type of limiter can also be set to a maximum value. It is also useful in applications with continuous running. It can be used in low power applications, such as robotic actuators.
A magnetic particle clutch is also a good example of a torque limiter. This type uses a current to create a magnetic field, a la the magnetic hysteresis. This magnetic field is then converted into d-q coordinates, which are viewed in the rotor reference frame. The magnetic particle clutch’s most notable feature is that the torque can be statically set or dynamically adjusted.
The most important function of a torque limiter is to prevent the engine from overheating or explosion. This can be achieved by setting the correct torque limit, or by having a system that will automatically reset the limit if the torque limit is exceeded. Some torque limiters even have a compression adjustment that can be used to set the appropriate limit.
Other types of torque limiters include a spring-loaded pawl-spring type, a ball detent type, and a synchronous magnetic type. A spring-loaded pawl-spring type can also be manually or automatically reset. A ball detent type may have several detent positions. A synchronous magnetic type may have more backlash than a mechanical type.

Mach III friction torque limiter

Basically a torque limiter is a device that protects the transmission from damage when the torque is pushed beyond a certain limit. This is achieved by preventing the torque from transmitting into the gearbox. The limiter is a small device that can be mounted on any shaft. If you are looking for a simple yet effective way to protect your investment, then you should consider a torque limiter.
A friction torque limiter is a small device that transfers torque linearly in relation to the force applied to a set of discs. This is the simplest form of torque transfer and it is not difficult to install.
A torque limiter is typically a small device that is mounted on the end of a shaft or in the output shaft of a gearbox. This device can be configured in a number of different ways. The most common configurations involve mounting the device on the end of the shaft. It can be positioned to rotate in both the clockwise and counterclockwise directions.
A friction torque limiter is a small device that protects the transmission from damage when the torque is pushed beyond a certain limit. The limiter is a small device and it can be positioned to rotate in both the counterclockwise and clockwise directions. The limiter has a number of different mounting configurations, ranging from through-shaft to NEMA C-face. Regardless of the mounting method, the limiter is a small device that is easy to install.
The torque limiter is the best and cheapest way to protect the transmission from damage. In the event of an overload, the device will disengage and disconnect the barrel from the gearbox. You can also get an overload detection system that monitors the output shaft rotation and signals the control system to shut down the motor.
A torque limiter is a small device that can protect the transmission from damage when the torque is pumped beyond a certain limit. This is achieved through a combination of a drive hub and a set of discs. The discs are able to rotate in both the counterclockwise and the clockwise directions.

CZPT FT series torque limiter

FT CZPT is a torque limiter made of stainless steel. The FT is a full-trough concave curve, full-pour casting emitter, with a standard 6 inch width and 250 watts of output. The limitator is protected by corrosion and a white glaze. It is also tamper-resistant, and pre-shimmed and pre-tested. It is available in a variety of colors.
The FT CZPT torque limiter has a center member machined flat, with a sintered iron bushing that protects the hub of the limiter from slippage. The bolts are pre-shimmed at the factory, and they are pretested to ensure that the force is consistent. The spring cup bolts come in a variety of colors. A torque setting is pre-set in the factory, and the limiter is delivered ready to use. The FT CZPT torque limiter includes a chain coupling, and is available in a variety of torque limiters. If you have questions about this torque limiter, or are interested in ordering a limitator, you can contact the FT CZPT sales team.

editor by czh 2022-11-30